Click Here for
Track Your Paper
ISSN:2454-4116

International Journal of New Technology and Research

Impact Factor 3.953

(An ISO 9001:2008 Certified Online Journal)
India | Germany | France | Japan

Study of depth of etching in Photo Chemical Machining by coloured Phototool

( Volume 5 Issue 4,April 2019 ) OPEN ACCESS
Author(s):

Sumit S. Khajepawar, Guruprasad V. Badave, Shubham S. Bhosale, Dnyanraj S. Telang, Nitin D. Misal

Abstract:

The conventional machining deals with the removal of metal by direct contact between the tool and the work piece, which results into the formation of chips, debris, burr, etc. So, there is a huge scope for unconventional machining process. This paper focuses on study of Depth of etching in photochemical machining by using colored photo tool. The objective is to study the effect of different colored photo tools and achieve the stepped structure at micro level. This process is the bridge between 2D and 3D manufacturing processes. Initially the colored photo-tools are created; copper material was selected for experimentation. The control parameters selected were temperature, concentration and time. The concentration of etchant is 400 grams per liter. The temperature of the etchant is 50 degree Celsius and the time for etching is 300 seconds. The readings are taken by Digital Micro-meter.

DOI DOI :

https://doi.org/10.31871/IJNTR.5.4.29

Paper Statistics:

Total View : 625 | Downloads : 616 | Page No: 68-71 |

Cite this Article:
Click here to get all Styles of Citation using DOI of the article.